Products
-
Acrylic Laser Cutting Machine
Very good at cutting big size design, Widely used, Energy saver, whole machine max power consumption is only 2.5KW. easy operate, specialized working system The development goal of CM series laser equipment is to give full play to the performance of motion control.
-
Plywood Laser Cutting Machine
Very good at cutting big size design, Widely used, Energy saver, whole machine max power consumption is only 2.5KW. easy operate, specialized working system The development goal of CM series laser equipment is to give full play to the performance of motion control.
-
Drilling Precise Holes in Glass Femto Laser Glass Cutting
Drilling – specifically laser drilling – is a process that can be used to make micro-holes in almost any material. Pulsed lasers effectively complete this work by depositing very small, finite amounts of energy into a material, resulting in extremely precise and reproducible material removal. Brief Description 1.Realize X, Y, Z motion control in three directions; 2.Real-time controls the rotation of the laser and changes of processing tilt angle; 3. By setting different combination of... -
Femto laser glass cutting, Glass micro drilling
Drilling – specifically laser drilling – is a process that can be used to make micro-holes in almost any material. Pulsed lasers effectively complete this work by depositing very small, finite amounts of energy into a material, resulting in extremely precise and reproducible material removal. Brief Description 1.Realize X, Y, Z motion control in three directions; 2.Real-time controls the rotation of the laser and changes of processing tilt angle; 3. By setting different combination of... -
UV Laser Drilling Machine, PCB Drilling Machine, FPC Laser Drilling Machine
Drilling – specifically laser drilling – is a process that can be used to make micro-holes in almost any material. Pulsed lasers effectively complete this work by depositing very small, finite amounts of energy into a material, resulting in extremely precise and reproducible material removal. Brief Description 1.Realize X, Y, Z motion control in three directions; 2.Real-time controls the rotation of the laser and changes of processing tilt angle; 3. By setting different combination of... -
Picosecond Laser Automatic Silicon Wafer Dicing Machine
The high-quality attributes of the UV wavelength allow for the cutting and drilling of delicate materials with minimal heat affected zone – and the proof is in the results: clean side-walls with precise dimensions and virtually zero debris.
-
Medical Coronary Stent Cutting/Micromachining NiTi Tubes
Medical Coronary Stent Cutting/Micromachining NiTi Tubes
laser micromachining, laser tube cutting , tube-cutting, laser tube cutting machines
-
Laser Cutting Machine for Cloth
cw -1610TTF Laser Cutting Machine,high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient The equipment is stable and easy to operate. The shoe material is cut and cut beautifully.The whole machine has low energy consumption and the equipment is cost-effective.
-
Laser Cut Polyimide Stencil/Kapton
Laser Cutting Laser cutting is the complete removal and separation of material from the top surface to the bottom surface along a designated path. Polyimide films such as Kapton are easy to cut using Laser technology. The edges that result from laser cutting will show a very narrow strip of charred material and residue at the cut edge. In general, charring and residue generation are proportional to material thickness and inversely proportional to laser wattage. Most, if not all, of the... -
ITO Conductive Glass /FTO Film Glass Laser Ablation
Structuring of TCO/ITO Layers With the UV Laser Transparent conductive oxides (TCOs) are electrically conducting materials that are applied in thin layers to transparent substrate materials. ITO layers are especially common. They can be structured very selectively with the UV laser. Finest insulation on invisible layers Advantages of Laser Structuring of TCO/ITO Layers Absolutely invisible structuring of transparent ITO coatings No damage to the substrate material Flexibility: Layout can be ... -
Laser Micro Machining Machine
Ultrafast Laser Micromachining New lasers technology fill the need for precision micromachining in smartphones, automotive components and medical devices. Main features High fabrication speed – up to 300 mm/s (more on request) Fabrication of complex objects with submicron resolution High-performance galvanometer scanners Pulse density control Precise object positioning with submicron accuracy Object movement and laser pulse synchronization in time and space. Specifications Precise obj... -
100 watt co2 laser cutter
Very good at cutting big size design, Widely used, Energy saver, whole machine max power consumption is only 2.5KW. easy operate, specialized working system The development goal of CM series laser equipment is to give full play to the performance of motion control.
-
Online
-
Phone
-
E-mail
-
Top