Marking on the Surface of Conical Objects – Olympic Torch Pattern Marking

Marking on the Surface of Conical Objects – Olympic Torch Pattern Marking

  • CO2 Galvo Laser Cutting & Engraving Machine

    CO2 Galvo Laser Cutting & Engraving Machine

    The CO2 glass tube marking machine CX-80-100FD can engrave and mark a large area on non-metallic surfaces with fast and beautiful processing. Textiles can be engraved on the entire roll and marked dynamically. Layer fixation, complete the perfect combination of surface treatment and hollow carving step by step. Large format glass tube laser marking easy to learn, stable operation, durable.

  • Fiber Laser Cutting Machine for Tube and Steel

    Fiber Laser Cutting Machine for Tube and Steel

    With exclusive material supporting device, machines run smoothly when cutting 6m pipe. A multi-function metal cutting machine that combines metal round tubes cutting, square tubes cutting and sheet metal cutting. Advanced chuck clamping system, 360-degree cyclic cutting.

  • Fiber Laser Marking Machine

    Fiber Laser Marking Machine

    Chanxan uv laser marking machine can achieve hyperfine marking,the heat affecting area very small,it won’t have heat effect, there is no burning problem,pollution-free,high marking speed,high efficiency and suitable performance.High quality and special design. solid aluminium protection cover for optical path, also with two small fan ensure the cooling effect more better.

  • Synthetic Textile Laser Cutting Machine

    Synthetic Textile Laser Cutting Machine

    Very good at cutting big size design, Widely used, Energy saver, whole machine max power consumption is only 2.5KW.  easy operate, specialized working system The development goal of CM series laser equipment is to give full play to the performance of motion control.

  • Laser Engraving Textile

    Laser Engraving Textile

    CO2 RF Metal tube marking machine is famous for its long life-span, thin and strong laser beam and steady output. Speed can be up to 7000mm/s. With special 3D galvo, machine can work large areas without affecting laser beam

    It is widely used in wall cloth marking, denim jeans marking, wood, acrylic and most of nonmetal materials marking.

  • Laser Engraved ABS Plastic

    Laser Engraved ABS Plastic

    Chanxan uv laser marking machine can achieve hyperfine marking,the heat affecting area very small,it won’t have heat effect, there is no burning problem,pollution-free,high marking speed,high efficiency and suitable performance.High quality and special design. solid aluminium protection cover for optical path, also with two small fan ensure the cooling effect more better.

  • Wafer Laser Dicing,Stealth laser cutting

    Wafer Laser Dicing,Stealth laser cutting

    Application Silicon wafer with metal film on the back, GaP (gallium phosphide) wafer, InP (indium phosphide) wafer, GaN (gallium nitride) wafer, Ge (germanium) wafer, etc. GaAs wafers are brittle and prone to cracking or chipping during cutting, so it is difficult to increase the feed speed of the usual grinding wheel blade cutting. If the laser full cutting technology is used, the processing feed rate can reach more than 10 times the cutting feed rate of the grinding wheel blade, thereby i...
  • PCB Laser Marking Machine

    PCB Laser Marking Machine

    Structuring of TCO/ITO Layers With the UV Laser Transparent conductive oxides (TCOs) are electrically conducting materials that are applied in thin layers to transparent substrate materials. ITO layers are especially common. They can be structured very selectively with the UV laser. Finest insulation on invisible layers Advantages of Laser Structuring of TCO/ITO Layers Absolutely invisible structuring of transparent ITO coatings No damage to the substrate material Flexibility: Layout can be ...
  • FPCB Laser Cutting Machine
  • Laser drilling micro holes

    Laser drilling micro holes

    Applicable for the high-speed specially-shaped cutting of glass and sapphire with DOL<50µm, cover plate glass of mobile phone, protective lens of camera, cover plate of Home key, and optical lens.

  • Alumina Ceramic Substrate Laser Cutting machine

    Alumina Ceramic Substrate Laser Cutting machine

    Laser Machining Ceramic Substrate Chanxan have excellent laser service for Al2O3, ALN substrate. Laser Processing Service for Ceramic substrate: 1.Laser Cutting, Scribing, and Drilling service for ceramic substrate. 2.Chanxan provide the design, laser express and surface treatment consultation service. 3.Customization is available. Contact us
  • Laser Cutting Machine CW-1310

    Laser Cutting Machine CW-1310

    Approximate possibilities of laser cutting   Laser power Acrylic(мм) Plywood(мм) MDF(мм) 40 watt 3 2 1,5 50 watt 5 4 2,5 60 watt 8 5 3 80 watt 12 8 6 100 watt 15 12 9 130 watt 20 15 12 150 watt 25 20 15