China CO2 Metal tube cutting machine CW-650R Manufacturer and Supplier

Details

Introduction

High-precision non-metal imported RF tube laser cutting machine CW-650R laser uses imported RF laser,

The material for the touch screen industry is mainly to improve the curling phenomenon when cutting the screen lens and ITO film of ordinary metal tube.

Improve the absorption of laser energy by materials, and make up for the lack of cutting of domestic laser equipment for touch screen.

The integral casting of the machine tool has high precision and stability, and effectively eliminates the vibration generated in the high-speed cutting process.

Double screw, double motor drive system, with high-speed arc cutting function.

Automatic lubrication system, maintenance-free transmission parts, can cut corrosive materials.

With power, frequency and speed following functions, effectively reduce corner cutting burrs.

The laser cutting machine of this machine is carefully built according to the processing needs of touch screen, electronic paper, PCB, composite materials, etc., based on the international advanced precision cutting technology and excellent user experience design concept. It adopts a special integral casting machine tool to ensure long-term high Stable cutting accuracy, compact overall design, adopting German advanced double screw and double motor transmission system. Greatly improve the processing speed of customers, which is unmatched by peers.

Details

Features

1.Ball screw guide, imported laser RF metal tube, marble platform, cast aluminum gantry structure and cast iron chassis.

2.High-precision machine body frame and high-precision servo screw drive ensure position accuracy and dimensional accuracy, better roundness, and better corner effects.

3.Stable walking and energy control make the heat-affected zone of the product edge cut by the machine smaller, smoother cutting edge effect, and good consistency of effect.

4. The software is superior in performance, which can realize the functions of layered cutting, optimizing the cutting path, and laser energy following speed. The cutting effect is consistent and the energy of the material half-cut is well controlled.

Parameter

Model	CW-650R
Working area	600*500mm
Laser Type	30W -150W optional
Laser type	Imported CO2 RF metal tube
Lens	A full set laser transmission lens imported from USD
Cooling type	Water air cooling system
Carving scanning speed	0-60000mm/min
Cutting speed	0-40000mm/min
Laser energy control	0-100% by software setting
Minimum font	Chinese :2.0mm2.0mm, English:1.0mm1.0mm
Maximum scanning accuracy	4000 DPI
Positioning accuracy	≤0.01mm
Control system	DSP control system
Graphic format supported	DST/PLT/BMP/DXF/DWG/AL/LAS
Drive system	Imported servo motor
Accessories	Exhaust fan and pipe
Power	Ac 110V/220V ±10%, 50HZ/60HZ
Working condition	Temperature:1-45℃ humidity:5-95%

Industry

Precision cutting of electronic materials, semi-cutting of film materials, die-cutting in the electronics industry, high-precision cutting and opening of other non-metallic materials.